Ahhui Tianguang sensor Co Ltd
+86(0552)4125969 4923217
Home ยป The weighing sensor technology parameters
The weighing sensor technology parameters

The weighing sensor technology parameters. 

Technical parameters (including weighing sensor, weighing sensor manufacturers): 

1) weighing sensor output 

The measured (quality) conversion obtained by weighing sensor can be measured. 

2) weighing sensor division valueWeighing and measuring range of the sensor is one of the parts size. 

3) weighing sensor verification scale value In order to accurately grade, weighing sensor used in testing, to the quality of the expression of weighing sensor unit index value. 

4) the minimum division value weighing sensor calibrationMinimum verification scale weighing sensor measuring range can be divided into value. 

5) minimum static load Can be applied to the weighing sensor, does not exceed the maximum permissible error of the value of the minimum quality. 

6) the largest scale Applied to the weighing sensor, the maximum permissible error does not exceed the maximum quality value. 

7) nonlinear Weighing sensor increasing deviation calibration curve and a straight line. 

8) lag error Applying the same load weighing sensor, the difference between the two readings; one is reading from the beginning of the minimum load increasing, another is reading from the beginning of the maximum load. 

9) creep At constant load, and all environmental conditions and other variables remain unchanged, the change of the weighing sensor output time. 

10) the minimum static load output recovery After the load is applied, the weighing sensor output minimum static load test of the.

11) repeatability error In the same load and the same environmental conditions, the difference between the readings of the weighing sensor output. 

12) min Jing Zaihe The output temperature effect due to environmental temperature changes caused by the minimum load changes in output. 

13) sensitivity to temperature Changes in the output sensitivity due to the change of environmental temperature. 

14) weighing sensor measuring range Measured value range, the measurement result is not within this range beyond the maximum permissible error. 

15) safety load limit In the weighing sensor is applied, the maximum load does not produce permanent change exceeds the value of the properties. 16) the maximum load range Test or use, applied to the maximum amount of sensor values, the value is not greater than the maximum scale. 

17) the minimum load of the measuring range Test or use, applied to the minimum amount of sensor values, the value is less than the minimum static load. 

18) the number of test sub sensor The number of test sub sensor measuring range is divided into the. 

19) sensitivity Response of the sensor output of the corresponding changes in the ratio of excitation.

   2015-4-15
Related news